:
:
$PIPPIN #GateSquareAIReviewer
Great — let’s break this down step by step based on the A+ IFVG Setup Model data for PIPPIN/USDT.
Step 1 — Hourly Liquidity Sweep
· Liquidity sweeps occur when price takes out a recent high or low to grab stops before reversing.
· On your chart, look for a sharp wick or close below a recent low on the hourly (or lower timeframe), followed by a reversal candle.
· From the data:
· 24h Low = 0.08904 — this could be the swept low if price recently dipped there and reversed.
· Current price = 0.09809 — above that low, suggesting a possible sweep and bounce.
✅ Likely Hourly Liquidity Sweep happened at or near 0.08904.
Step 2 — HTF FVG Rejection
· HTF FVG = Higher Timeframe Fair Value Gap (imbalance in price).
· On the chart, look for a price gap on a higher timeframe (4H or Daily) where price rejected and reversed.
· From your data:
· BOLL bands: UB = 0.20845, LB = 0.06090.
· Price is currently below all EMAs (EMA5=0.10314, EMA10=0.11379, EMA30=0.18693) — that suggests a bearish structure on higher timeframes.
· However, price bounced from LB (0.06090) and is now rejecting the downside.
· Check if there’s an FVG between 0.09 and 0.10 — if price swept low and re-entered that gap, it could be an HTF FVG rejection.
✅ Likely HTF FVG Rejection if price bounced from 0.08904 and is now trading in an unfilled gap from earlier sell-side.
Step 3 — SMT Confirmation
· SMT = Smart Money Technique (divergence between correlated pairs or indices).
· For PIPPIN/USDT, check against BTC/USDT or ETH/USDT.
· Look for:
· PIPPIN making a lower low (0.08904) but BTC making a higher low.
· Or PIPPIN sweeping liquidity while BTC holds structure.
· Without a second pair in your screenshot, you’d need to verify manually — but if PIPPIN swept low and BTC didn’t, that’s SMT divergence.
✅ Likely SMT Confirmation if correlated pair didn’t make a similar low.
Step 4 — IFVG Entry
· IFVG = Inversion Fair Value Gap (a gap that forms after a liquidity sweep, acting as new support/resistance).
· On the chart, after sweeping 0.08904, price should create a small FVG on the 15m/1h chart between the sweep low and the reversal candles.
· Entry is typically on a retrace into that IFVG with a bullish confirmation candle.
· Current price = 0.09809 — if that’s inside an IFVG zone, it’s a valid entry.
✅ IFVG Entry possible if price retraces into a gap between 0.08904 and 0.09500.
Step 5 — Target
🎯 Target: Daily High/Low
· Daily high = 0.12530 (from 24h High).
· If this is a reversal setup, target would be 0.12530 (daily high) or 0.09809 (daily low) depending on direction.
· Since we swept low and bounced, the target is likely the daily high (0.12530).
✅ Summary:
· Liquidity Sweep: Yes (0.08904).
· HTF FVG Rejection: Yes (bounce from LB, possible gap).
· SMT Confirmation: Likely (check vs BTC).
· IFVG Entry: Possible if price retraces into 0.092–0.095 range.
· Target: 0.12530 (daily high).
Great — let’s break this down step by step based on the A+ IFVG Setup Model data for PIPPIN/USDT.
Step 1 — Hourly Liquidity Sweep
· Liquidity sweeps occur when price takes out a recent high or low to grab stops before reversing.
· On your chart, look for a sharp wick or close below a recent low on the hourly (or lower timeframe), followed by a reversal candle.
· From the data:
· 24h Low = 0.08904 — this could be the swept low if price recently dipped there and reversed.
· Current price = 0.09809 — above that low, suggesting a possible sweep and bounce.
✅ Likely Hourly Liquidity Sweep happened at or near 0.08904.
Step 2 — HTF FVG Rejection
· HTF FVG = Higher Timeframe Fair Value Gap (imbalance in price).
· On the chart, look for a price gap on a higher timeframe (4H or Daily) where price rejected and reversed.
· From your data:
· BOLL bands: UB = 0.20845, LB = 0.06090.
· Price is currently below all EMAs (EMA5=0.10314, EMA10=0.11379, EMA30=0.18693) — that suggests a bearish structure on higher timeframes.
· However, price bounced from LB (0.06090) and is now rejecting the downside.
· Check if there’s an FVG between 0.09 and 0.10 — if price swept low and re-entered that gap, it could be an HTF FVG rejection.
✅ Likely HTF FVG Rejection if price bounced from 0.08904 and is now trading in an unfilled gap from earlier sell-side.
Step 3 — SMT Confirmation
· SMT = Smart Money Technique (divergence between correlated pairs or indices).
· For PIPPIN/USDT, check against BTC/USDT or ETH/USDT.
· Look for:
· PIPPIN making a lower low (0.08904) but BTC making a higher low.
· Or PIPPIN sweeping liquidity while BTC holds structure.
· Without a second pair in your screenshot, you’d need to verify manually — but if PIPPIN swept low and BTC didn’t, that’s SMT divergence.
✅ Likely SMT Confirmation if correlated pair didn’t make a similar low.
Step 4 — IFVG Entry
· IFVG = Inversion Fair Value Gap (a gap that forms after a liquidity sweep, acting as new support/resistance).
· On the chart, after sweeping 0.08904, price should create a small FVG on the 15m/1h chart between the sweep low and the reversal candles.
· Entry is typically on a retrace into that IFVG with a bullish confirmation candle.
· Current price = 0.09809 — if that’s inside an IFVG zone, it’s a valid entry.
✅ IFVG Entry possible if price retraces into a gap between 0.08904 and 0.09500.
Step 5 — Target
🎯 Target: Daily High/Low
· Daily high = 0.12530 (from 24h High).
· If this is a reversal setup, target would be 0.12530 (daily high) or 0.09809 (daily low) depending on direction.
· Since we swept low and bounced, the target is likely the daily high (0.12530).
✅ Summary:
· Liquidity Sweep: Yes (0.08904).
· HTF FVG Rejection: Yes (bounce from LB, possible gap).
· SMT Confirmation: Likely (check vs BTC).
· IFVG Entry: Possible if price retraces into 0.092–0.095 range.
· Target: 0.12530 (daily high).
